Technical Specifications: |
Test Item |
Standard No. |
Standard Requirement |
Test Result |
Compliance Analysis |
Apparent Density |
EN 14617-1:2013 |
No threshold specified; requires reporting of measured data (typical artificial stone ≥2000 kg/m³) |
2300 kg/m³ |
— |
Water Absorption |
EN 14617-1:2013 |
No threshold specified; requires reporting of measured data (high-quality artificial stone ≤ 0.1%) |
0.04% |
Far exceeds industry benchmarks (close to sintered stone performance) |
Flexural Strength |
EN 14617-2:2016 |
Minimum requirement: ≥7 MPa |
58.7 MPa |
Exceeds standard minimum by 8x (excellent structural strength) |
Impact Resistance |
EN 14617-9:2005 |
• Class A: ≥10 J |
>11.77 J |
Achieves highest Class A (suitable for high-traffic areas) |
• Class B: ≥7 J |
• Class C: ≥4 J |
Chemical Resistance |
EN 14617-10:2012 |
• Class C4: Reflectivity ≥80% after 8h acid/alkali immersion |
C4 Class(HCl/NaOH reflectivity ≥92.7%) |
Fully meets highest C4 requirement (resists strong corrosive environments) |
• Class C3: Reflectivity 60-80% |
Stain Resistance |
EN 14617-10:2012 Annex A |
No visible change after exposure to liquids (e.g., coffee, wine) |
No visible change after 24h |
Complies with highest requirement for non-porous materials |
Coefficient of Thermal Expansion |
EN 14617-11:2005 |
No threshold specified; requires reporting of measured data (typical artificial stone: 25-45×10⁻⁶/℃) |
40.2×10⁻⁶/℃ |
— |
Dimensional Stability |
EN 14617-12:2012 |
Classification: |
0.02 mm (Class A) |
Achieves optimal Class A (excellent stability in humid environments) |
(Wet Expansion) |
• Class A: Deformation <0.3 mm |
• Class B: 0.3-0.6 mm |
Dimensional Accuracy |
EN 14617-16:2005 |
• Side length: ±0.5 mm |
Length error: 0.02mm |
Significantly exceeds standard requirements (industrial-grade precision) |
• Flatness: ≤0.5% |
Flatness ≤0.12% |